Today I will show how to read Honda City Airbag MCU MPC5604P data with Xhorse VVDI PROG Programmer. After successfully reading, I can reset the airbag module. Here I’m using the MCU Reflash Cable V3 to connect it.
The 1st connection pin is GND, 2nd is VCC, 3rd is green wire, 4th is purple wire, 5th is brown wire, 6th is blue wire, and the last is reset wire.
I would recommend connecting VVDI PROG with 12 volts supply.
Open VVDI PROG software.
Type: 2-MCU
Brand: MOTOROLA-MPC560XXXX
Chip: MPC5604P
Here we can also check the connection diagram.
Read DFLASH.
Wait processing until 100%…
Reading success.
