Xhorse 2nd Gen Wired Remote What Is New Different (1)

XHORSE 2nd GEN Wired Remote, What’s New & Different?

Xhorse is launching the all-new 2nd Generation XKB520EN Wired Remote, which uses the latest XM5118 transceiver. This is the VVDI upgrade again. What’s new & different from the 1st generation? There are the following 3 points: 1. Wireless Programming The 1st Gen Wired Remote still uses the traditional wired programming method while the new XKB520EN can now support wireless programming. Read More…

Vvdi Key Tool Plus Add 2017 Audi A8 Key 1

Xhorse VVDI Key Tool Plus Add 2017 Audi A8 Key by OBD OK

Xhorse VVDI Key Tool Plus can program a new key for the 2017 Audi A8 by OBD successfully. All it takes is only 3 steps. Just prepare a working key and a new blank key, and let’s go. Step1. Read BCM2 Data Immo programming >> Audi >> Automatically diagnose models >> Start programming Identified the Volkswagen/ Audi 5th immo system. Read BCM2 Data >> OBD identify BCMRead More…

Xhorse Multi Prog Force Unlock Bmw Cas4 5m48h Success (2)

XHORSE Multi-Prog Force Unlock BMW CAS4 5M48H Success

XHORSE Multi-ProgProgrammer can force unlock BMW CAS4 5M48H successfully if the simple chip unlock fails. Next, I’ll demonstrate both unlock operations. 1. Simple Unlock BMW >> BMW(IMMOBILIZER) >> CAS4-5M48H-R/W-UNLOCK >> OK >> Unlock Already backup the Dflash & Pflash? OK Chip unlocking failed! Error code: 00000084 command number error. In this case, wRead More…

Xhorse Multi Prog Solderless Adapter Read Cas4 5m48h 2

XHORSE Multi-Prog + Solderless Adapter Read CAS4+(5M48H) OK

The XHORSE Multi-Prog Software SW V1.2.3.0 and firmware V1.2.7 version has fixed the issue that the CAS4 Solder-Free Adapter is not working for multi-prog programmer. FW V1.2.7 has fixed 9S12 reading issue to decode CAS4+(5M48H). XDNP12 Solder-Free Adapter has 2 versions: V1.3 & V1.2. The difference is that the new type adapter V1.3 has the relay inside, while the old V1.2 does not. SoRead More…