Xhorse.co.uk Technical Support
The XHORSE Multi-Prog Software SW V1.2.3.0 and firmware V1.2.7 version has fixed the issue that the CAS4 Solder-Free Adapter is not working for multi-prog programmer. FW V1.2.7 has fixed 9S12 reading issue to decode CAS4+(5M48H). XDNP12 Solder-Free Adapter has 2 versions: V1.3 & V1.2. The difference is that the new type adapter V1.3 has the relay inside, while the old V1.2 does not. SoRead More…
Today I’m gonna show how to clone BMW X3 Continental MSV90 ECU with Xhorse Multi-Prog Programmer by bench. Here I prepared an old ECU and a new one. Note: Please ensure the Multi-Prog Software version is 1.44 or above. Verify file integrity before writing. Open Multi-Prog software, Device >> BMW_CONTINENTAL_MSV90(BMW -> X3 Series) Follow the wiring diagram to connectRead More…
Today I’ll show how to use Xhorse Multi-Prog Programmer to read & write VW Bosch EDC16/EDC17 on bench. Connect Bosch EDC16 to Xhorse Multi-Prog according to the wiring diagram. EXT EEPROM >> Read It took the 40s to read the EEPROM… Read success. EXT FLASH >> Read It took 2 minutes and 14s to read the external flash. Read success. INT FLASH >> Read IRead More…
This is a quick demo on how to read BMW Bosch MEV17.2.9 ECU with Xhorse Multi-Prog on bench. Open Multi Prog software, Device >> ECU >> BMW >> BMW_BOSCH_MEVD17.2.9_Fxx(N20) >> OK 1)Click “Detail”, and follow the wiring diagram to connect Multi-Prog & ECU. 2)Power on Multi-Prog. Now we can start reading ISN, EEPROM and FLASH here. Read More…
