Xhorse.co.uk Technical Support
Problem: The Xhorse Condor XC-Mini Plus cannot accurately cut the HU66 key. I tried three keys, but all were wrong. What’s the matter? Please help. Troubleshooting From the image provided, the engineer suggested: 1. Please make sure the drill diameter is correct. Check if the cutter is 2.5mm; 2. Check if the key option is correct, as the key blade doesn’t look like HU66. Read More…
Today we’ll show the procedure before using the Xhorse Key Cutting Machine to complete the add key and all key lost for HU162T 8-cut, 9-cut, and 10-cut keys. The tutorial applies to machines such as Dolphin II, Condor XC-MINI Plus II, etc. How to distinguish the HU162T 8-cut, 9-cut & 10-cut key? As shown in the picture, the 8-cut has only 1 fixed cut on the side and is straight. The effectRead More…
Today we’ll cut a new 2021 Honda emergency key with Xhorse Dolphin II by bitting. The new 2021+ Honda smart keys have a new keyway that is real thin and double-sided. The OEM keys are steel, but we’re going to cut a brass key this time. Cause that’s a little easier on the cutter. We’ve got the bidding code from a 2021 Honda lock: A35131, B354. The key has A and B sides with different slopesRead More…
Problem: The XHORSE DOLPHIN XP-005 could not decode the original key when I selected the HU100 option. The machine stopped and gave the prompt: “Error code: 2, probe not detected. Please do the following steps: 1. Check the clamp position is correct; 2. Check the key insert properly, no chips” Solution The image provided shows that the key is clamped in the wrong groove. Remove thRead More…
Hello you guys! This is a door lock removed from the 2014 Lexus IS250. We’re making the emergency key which is a single-sided cut key with Xhorse Dolphin XP-005 machine. The key code on the lock is 88737. My key book, says the 2014 IS250 code series is between 80000-89999. So our key code 88737 is correct. It’s A8 cut, converts 1233, 3131. This is a single-sided key and opensRead More…
This post will guide you on how to cut a dimple key by using the Xhorse Condor XC 002 PRO Mechanical Key Cutting Machine. Click on the video to view the full operation: Here are the steps: 1. Insert the dimple probe and cutter (internal). 2. Insert the original key and the blank key using a shim. 3. Rotate the knob to standard mode. 4. Press down the handle and fiRead More…
Today I’m gonna show how to cut the 2021 Kia K5 key with Xhorse Dolphin XP005L when all keys lost. It’s the KK2 blade since I’ve decoded its key code from the lock. Let’s go ahead to start. All key lost >> ASIA >> Kia Please enter key code: D0625 It tells us to use M5 clamp side B, tip aligned 2nd position. After installing the key, press “Cut key” to continue.
Read More…
Since I’ve got the key code from this 2021 KIA K5 lock, next I’m gonna cut a new key with Xhorse Dolphin II for it. It’s the KK2 blade. All key lost >> ASIA >> KIA >> Enter key code: D0625 Dolphin XP005L tells to use M5 clamp side B, tip align 2nd position. Install the key blade as prompted. OK >> Cut Key >> Cut Xhorse Dolphin will start cutting… Once cuRead More…
Xhorse Dolphin XP-005 has released an upgrade to fix a common problem. That’s when cutting the single-sided Toyota emergency key on the M2 clamp with a shim, it’ll pop the key out no matter how hard you tighten it. It’s super frustrating. Now I’ll show how to do it with the M1 clamp, which is mainly used on side cut keys. Connect VVDI Key Tool Max Pro to the Dolphin machine. Cut by bittingRead More…
Problem: My Xhorse Dolphin XP-005 Key Cutting Machine gets an “Error code: 70” and stops doing anything. It tells us to do the following steps: 1. Check the clamp is correct. 2. Check height level adjustment finished. 3. Check clamp calibration finished. 4. Check the key insert properly, no chips. The battery on the screen also displays “empty” even with a full battery. What’s going on? PlRead More…
