Solved Xhorse Dolphin Xp 005 Error Code 70 Empty Battery Issue (3)

Solved: Xhorse Dolphin XP-005 Error Code:70 Empty Battery Issue

Problem: My Xhorse Dolphin XP-005 Key Cutting Machine gets an “Error code: 70” and stops doing anything. It tells us to do the following steps: 1. Check the clamp is correct. 2. Check height level adjustment finished. 3. Check clamp calibration finished. 4. Check the key insert properly, no chips. The battery on the screen also displays “empty” even with a full battery. What’s going on? PlRead More…

Vvdi Prog

Xhorse VVDI Prog V5.3.3 Update and Software Download

Xhorse VVDI Prog can be upgraded to the 5.3.3 version now, this post will give you the software download link and more details. Download Free: https://we.tl/t-0F2kcBzhh9 Password: 123456 Update time: 2024-01-24 Update content: * This version DON’t need updated firmware. * Some ECU options process optimization. * Land Rover RFA Adapter options process optimization. * RH850 series SomRead More…

Xhorse Vvdi Key Tool Plus Godiag Program Bmw Cas1 Key (1)

Xhorse VVDI Key Tool Plus + GODIAG Program BMW CAS1 Key

Here we’ll demonstrate how to program the CAS1 mechanical key with Xhorse VVDI Key Tool Plus & GODIAG BMW Test Platform. No soldering, plug-and-play. Connection 1. Connect the CAS1 module & GODIAG Test Platform, power it on, and turn the ignition on. 2. Insert the key into the ignition, it’s ejected which means unprogrammed. Step 1. Backup Data File IMMO programming >&gRead More…

Xhorse Multi Prog Driver Installation Manual Win10 Win7 (4)

Xhorse Multi-Prog Driver Installation Manual Win10 Win7

If you’ve received the new Xhorse Multi-Prog, but find that there’s no response when connecting to the computer. The software shows the device is not connected. Don’t worry, that’s because you haven’t installed the Multi-Prog driver yet. Just follow the steps below. For the Win10 system, the driver will be installed automatically. So you don’t have to worry about it. For the WiRead More…

Xhorse Vvdi Key Tool Plus Godiag Add Bmw Cas2 Mech Key (1)

Xhorse VVDI Key Tool Plus + GODIAG Add BMW CAS2 Mech-Key

This is a demo on how to add a new CAS2 mechanical key with Xhorse VVDI Key Tool Plus & GODIAG BMW Mech-Key Test Platform. Preparation 1. Connect GODIAG Test Platform & adapter to CAS2 module, and give power on. 2. Put a new key into the GODIAG key slot, then press the START button. The IMMO light is NOT on, which means the key was not programmed. Add New Key Immo programmRead More…

Xhorse Multi Prog Eeprom Read Write Operation Manual (1)

Xhorse Multi-Prog EEPROM Read/Write Operation Manual

This is the Xhorse Multi-Prog Programmer operation manual on how to read and write EEPROM. Read this article carefully to learn for a start. What’s EEPROM? EEPROM is a memory chip used to store various electronic information data of the vehicle. The storage capacity of the memory, ranges from a few hundred bytes to several hundred megabytes. The Xhorse Multi-PROG provides a varietyRead More…