VVDI MB best key programmer for Mercedes W203

Acquiring a reliable key maker for Mercedes W203 onwards. Basically a key maker that can resolve an all keys lost scenario and duplicating. It should be autohex or VVDI or ACDP?

 

User’s Test Reports:

1. Program keys for W203 is easy.

Xhorse VVDI MB is good enough.

Duplicate, replace, enable or disable the key slot(s).

But need to understand the steps, not just follow.

Otherwise you will have trouble if any problems occurred.

 

Right now my favorite tool for adding key and all keys lost is VVDI PROG and VVDI MB. Along with all the adapters to use with VVDI Prog. I haven’t used my ABRITES for keys in the last year.

 

For the procedure of Mercedes W203 key programming with VVDI MB, there are some results on Google.

 

VVDI MB tool W203 all keys lost programming procedure:

Step 1:Read EIS Key Password

Connect the VVDI MB to your laptop

Open the VVDI MB BGA software

Select EIS Tools

Select IR in EIS Function

Select Chassis W203,463,639 (K)

 

Insert the IR adapter (blue) into the ignition (if already inserted, remove it and reinsert it again). Keep it there for 28 seconds.

The VVDI BGA button status should show Reading Data Success. EIS is normal. If the software asks if you want to read the password via IR, click Yes to continue. Reading the password via IR takes around 1-4 minutes.

 

Select the key used position, Read EIS key pass success.

 

Select Save EIS Data

Press OK to save HC05 format file

 

STEP 2:Prepare the Key File

Select Prepare Key File function

Click on Load EIS File

 

Upload EIS data you just saved

Select one used key option: Key 4 and v051

 

Select Prepare Key File

Save key file

 

STEP 3: Read Write Key

Select Read Write Key

 

Place your smart key onto the VVDI MB tool

Click the Identification key button

Check unused key status

Select Load Key file

Open key file you just saved

 

Show Key EEPROM data

Click on Write

Success message appears

 

Click on the Identification Key button again

Check the key number

 

Remove both keys from VVDI MB and EIS

 

Insert IR key into EIS

Switch on and off to check

 

Select IES Tools in software

Select IR

Select Chassis

Select Read EIS data and password

Insert the IR adapter (blue) into the ignition (if already inserted, remove it and reinsert it again). Keep it there for 28 seconds.

 

New key has been programmed successfully!

 

Here is the best source of VVDI MB tool:https://www.xhorse.co.uk/wholesale/xhorse-vvdi-benz-vvdi-mb-bga-tool.html