Hi, guys, today I’m gonna use the Xhorse VVDI Key Tool Plus Pad to add an ID47 key for 2018 Honda Jazz. Prepare an original key and a new smart key, let’s start:
Connect Key Tool Plus with OBD;
Separate key shell of new key, put the chip into key slot.
Program Remote
Remote program >> Honda >> City >> City Jazz ID47 G 1987 >> Generate
Wait writing data until 100%…
Burn success, press “Complete”.
Program Key
Immo programming >> Honda >> Select by type >> Immo system 3 >> Start programming >>Add a key
Turn off ignition switch, press “OK”.
Insert the programmed key, switch the ignition on. Press “OK”.
Turn off the ignition switch.
Turn on the ignition switch.
If no response within 10 seconds, please turn off/on the ignition switch again.
Turn off the ignition switch.
Insert the new key and switch the ignition on within 15 seconds.
Turn off the ignition switch.
Switch ignition on.
Turn off the ignition switch.
Switch ignition on.
Whether the immo indicator is off?
If the immo light is not off, please turn off again/switch ignition on and observe.
Press “Yes”.
\ 
Turn off the ignition switch.
Switch ignition on.
Operation completed. Please check if the key function is normal. Press ”OK”.
Test the key now, it can start the engine, and its remote works well.
Key programming has done!
Using VVDI Key Tool Plus to program an ID47 key for Honda Jazz 2018 successfully.
https://www.xhorse.co.uk/
