As you can see, the cylinder is really easy to pop out: 87358, so I don’t have to decode them. Next, I’m gonna use Xhorse Dolphin XP005 + Key Tool Max Pro to cut a Toyota TOY40 emergency key by this code. Let’s see what will happen.
Cut by bitting >> Toyota >> 87358 >> OK
Install the key blank on M5 clamp B side 2 position as prompted.
The key bitting codes are 4113, 1412.
Just write them down.
Cut key >> Continue
The Dolphin XP005 failed with an error code: 2, “Not detected probe”.
It was asked to do the following steps:
1. Check the clamp is correct.
2. Check height level adjustment finished.
3. Check clamp calibration finished.
4. Check the key insert properly, no chips.
This didn’t used to happen. I think this is a result of maybe an update. Remember to keep your Key Tool Max Pro updated to fix the bug.
Let’s leave it alone and try another way:
Vehicle database >> Toyota >> TOY40, 4-bittings >> OK >> Enter bitting codes: 4113, 1412 >> Cut key >> Continue
Xhorse Dolphin can complete the cutting this time.
Take out the key to have a test.
It does work.
Done.
