It’s said Xhorse XDKP00GL Key Reader can work fast and accurately to decode keys and reduce the risk of probe breaking. Locksmiths can also use plastic and metal key to decode with Key Reader. So I wanna give a review for first-time use.
Let’s see what’s in the Xhorse Key Reader box contains:
A Key Reader machine
A power adapter
A quality certificate
A user manual
Power adapter
There’s a screen and a switch button to open the keyhole on Key Reader. On the backside, it’s a power supply button, power adapter port & USB port.
XDKP00GLKey Reader can work with Xhorse Key Cutting Machine like Dolphin XP-005, XP-005L, Condor XC-Mini Plus, Condor Mini Plus II, Panda to cut keys after Identification directly. It also supports decoding keys on a smartphone only.
However, following I’m gonna use Key Reader + Panda to test.
How Xhorse Key Reader works?
1. Read & cut Suzuki Swift HU133R successfully.
Press the switch button and put the key into the keyhole for reading.
Open Xhorse App to connect Key Reader& Panda,
Optical identification >> Suzuki >> Swift >> HU133R >> OK >> Identification >> Identification
Key Reader will start identifying automatically…
Successful! It takes only seconds to read out the bitting codes.
Go to cut key here. After installing the key blank properly. Click
Cutting key >> Continue
Just wait for Panda machine to finish cutting.
Check the key.
The same as the original one. It cuts perfectly.
2. Read & cut Honda BRIO successfully.
Put the original key into the keyhole.
Optical identification >> Honda >> BRIO >> OK >> Identification >> Identification
Key Reader has read out key biting very quickly.
It’s done.
Go to cut a key. Install key blank as prompted, click
Cutting key >> Continue
Just wait for completed.
Alright, they are the same!
So as you can see, how the Key Reader is helpful for key duplication work. In my opinion, each locksmith would like it very much.
www.xhorse.co.uk