In general, Xhorse Remote Tester only has 2 frequency test range: 300Mhz-320Mhz & 434Mhz. Is it possible to change the Xhorse tester to work on 868Mhz? It actually can. Follow the tip below to learn how to do.
How to change Xhorse tester to work on 868Mhz?
1. Remove battery from remote tester.
2. Unscrew the 4 screws on backside of tester.
3. Open back cover, find the jumper cap position on device board. Change the jumper cap from left 2 pins to right 2 pins.
4. Assemble remote tester to have a try.
The Xhorse Frequency Tester can now detect 868MHz frequency.
Very easy and done.
Hope this is helpful.
Technical support
www.xhorse.co.uk
