Show how to cut Mul-T-Lock dimple key household key with Xhorse CONDOR XC-MINI PLUS II step by step.
Video guide:
Prepare:
The original key
Lock cylinder
1.0mm Probe
Dimple Cutter (internal)
Dimple Cutter (external)
M5 Clamp
Steps:
Step 1. Height Calibration
Stick in the probe and the dimple cutter (internal)
Make sure the clamp is tightened.
Tap “Settings”, then “Device Calibration”, then “Height Calibration”.
Step 2: Key Learning
Tap “Household key” and select the key brand “Mul-T-Lock”, then “Mul-T-Lock (8.8mm-R)”, then ” Mul-T-Lock 4-4″.
Insert the original key into the M5 clamp.
Tap “Decode key” to start key learning till 100% ok.
Condor XC-Mini Plus II APP shows “Household key learning completed”.
Step 3: Key Cutting
Insert the blank key into the M5 clamp and close the cover.
Tap “Start Cutting” then “OK”.
Flip the key.
100% ok
Clean the shavings and remove the key.
Tighten the clamp and install the dimple cutter (external).
Click “OK” to ensure the cutting key is completed.
Finish height calibration again.
Insert the key and start to cut the external cuts.
Tap “Start Cutting”, then “OK”, flip the key.
Key cutting completed.
Test if the new key can start the EIS.
Alright, Xhorse CONDOR XC-MINI PLUS II cut Mul-T-Lock dimple key household key successfully.
