This post is a quick tutorial of how to use Xhorse VVDI BIMTool Pro perform key programming for BMW CAS4/CAS4+ F Series. VVDI BIMTool Pro is a updated version of VVDI BMW tool, both are using same software.
Steps
Open Network And Sharing Center >> Change Adapter Settings >> Change to Local Area Connection.
Open BMW TOOL V1.6.2 software >> Click “Connect”>> Current system:CAS4, perform CAS key learning! Click “OK”
Click “CAS Key Learn” on the left board >> Select “OBD2-BMW CAS4/CAS4+ F-Series” in Car Type bar >> Get Key Info, click “OK”
Note: prepare dealer key and rest KM require unlock CAS4, enable key and disable key no need unlock CAS4!
Click “Unlock CAS4/CAS4+”>> Read the attention carefully, and click “Yes”>> Click “Yes” to use FAST-MODE
Select file store location, click “Save”>> Connected, start to transfer/receive unlock CAS4/CAS4+ data… wait until 100% completed.
Thus, the unlock CAS4/CAS+ data can be stored to use.
VVDI BIMTool Pro added ethernet port to support programming and coding module via DoIP. If you have an old Xhorse VVDI BMW tool, you can subscribe to Xhorse VVDI BMW Tool Exchange Service to update.
More information please contact us.
https://www.xhorse.co.uk/
