New arrival! Xhorse VVDI BEE Key Tool Lite is coming and beginning to pre-order now. Easy APP control on Android phones to efficiently identify, generate, and clone transponder. With bargain price to be an alternative. The good news is to snap one up now and get 6 FREE B5 Universal Remotes. Buy early and enjoy early.
Features
1. Generate remote
2. Generate, clone & identify transponder
3. Detect frequency
4. Detect ignition switch coil signal
5. Unlock Toyota smart key
6. Upgrade & unlock 8E remote
7. Renew the Honda cycle key
8. Set VVDI Super Chip type
* ID48 96-bit clone currently is not supported, more features are being updated.
VVDI BEE Key Tool Lite Function Instruction
How to connect Xhorse Key Tool Lite to a phone?
- Power on
Insert the TYPE-C cable and allow the Xhorse app to access the USB port of the phone, then connect the device.
- Power off
Unplug the TYPE-C cable
Note: If there is a prompt on the right side of the interface, open the phone settings and turn on the OTG connection switch.
How to use Xhorse VVDI BEE Key Tool Lite?
- Vehicle Remote
Support to generate Xhorse XK wire remote, XN wireless remote, XE wireless remote, and Xhorse smart remote.
- Generate Transponder
Support to generate VVDI XT27 super remote.
- Frequency Detection
Support to detect common car key frequency.
- Transponder Clone
1. Move the Key Tool Lite Close to the ignition switch;
2. Turn the ignition key on and off repeatedly.
(For the push start system, place Key Tool Lite close to the emergency switch area, then press the start button repeatedly.)
3. Take out the original key and better put it in VVDI super chip.
- IC/ID Clone
1. Place the IC/ID card as shown in the figure, and click the “IC/ID identification” button to identify;
2. Click “Clone” to start cloning.
