Today we’re going to use Xhorse VVDI BEE Key Tool Lite to program a 2014 Nissan Almera Sporttech 433MHz key. At present, the tool only supports working with Android phone. Following is the operation procedure.
Connect VVDI Key Tool Lite to a smartphone via Type-C cable.
Connect VVDI Key Tool Lite to a PCB via a programming cable.
1. Generate Remote
Open the Xhorse app, and press “Connect” to allow the app to access the USB port.
Go to the phone setting and turn on the OTG connection switch if the device connect fails.
Once OTG is turned on, Key Tool Lite will be powered on.
Device connected.
Vehicle remote >> Nissan >> Altima 2006 433
It’s said for Nissan Almera 433.92 to ASK XK Wired Remote.
Press “Generate”.
Generating remote…
Burn success.
Put a battery into XK PCB, and reinstall back to the remote shell.
2. Programming Remote
① Press the lock on all doors.
② Insert and remote the key from the ignition switch more than 6 times(door will cycle unlocked).
③ Press the lock on all doors, then press unlock button on the new remote.
Now test the new remote, it works OK.
This car is without an immobilizer and chip, so the key can normally start the car.
Done.
