How to use Xhorse Condor XC-MINI Plus II to cut a household key RB locks dimple key? In the process, you’ll also need an original household key for duplication. Follow the procedure below to learn how to do.
Full operation video
1. Cutting Setting
Settings >> Cutting setting >> Probe and cutter diameter setting >> Select “1.0mm” & “Dimple cutter(both)”, then save.
Insert the probe and the cutter.
2. Key Learning
Household >> RB locks >> Dimple key with sided internal dimple >> Dimple(Internal)(Front)
Fix the original key on M5 clamp.
Click “Decode key”.
XC-Mini Plus 2 will start decoding automatically…
Just wait until internal side learning is completed.
Dimple(External)(Front) >> Decode key
XC MINI Plus II will start again…
Household key learning completed.
3. Key Cutting
Select “Dimple(Internal)(Front)”, replace a blank key fixing on M5 clamp.
Start cutting >> OK
Put down the cover and wait for cutting…
Once done, flip the key to repeat cutting for the other side.
Select “Dimple(External)(Front)” to start cutting again.
Remember to cut the other side as before.
Condor XC-MINI Plus II is able to finish the cutting process automatically.
Key cutting completed.
Take out the key to compare with the original one.
They are same, and it does work.
Done!
