We’re going to make a universal key for the 2011-2017 Chrysler 300 by Xhorse Key Tool max with Mini OBD that connected to the OBD2 port of the car.
Alright, let’s go ahead and make our key.
Tap “Vehicle Remote” and look for Chrysler
We’re gonna go to “All remotes” and select the first one “Chrysler KeylessGo ID46 433MHZ” and it’s Prox.
When we select this one, we can see right here that it’s telling us that we need a smart remote from Xhorse. It cannot be super remote, it cannot be wireless,
We’re gonna go ahead “generate remote” we’re gonna put the lock button of Xhorse remote.
It might take a little while. When the light of Xhore remote flashes, it means that was successfully generated.
Make sure there’s a battery in the remote control, so you’re gonna have to have a battery in order to generate, if you don’t have a battery, it’s not going to generate, this is not wired or wireless, this is a smart remote of Xhorse.
As you guys can see a flash, that’s already complete, so we’re going to press complete.
And it’s ready for us to program to a vehicle okay.
Please plug the Mini OBD tool into the OBD2 port of Chrysler.
Go into “IMMO programming” and look for Chrysler.
“Select by type” selection.
Here, just select this keyless go.
Also there are IMMO system toothless rotary type, normal key.
Now we’re gonna go to type 1.
Press “Start execution”.
So first we go to connect our Bluetooth to our Mini OBD tool and then tap “Start execution”.
Go ahead and read the password.
It asks to switch the ignition on.
As you guys can see successfully read the password.
Tap “Add a key” and “Type 1”. please turn on the security light and turn off the ignition switch. And click on “Ok” to continue.
We’re gonna put in our password, it will shows “Successfully secure access”.
Please put the wanted adding smart keys at the center control position and press Unlock button repeatedly within 30 seconds, until door lock reacts.
we hear some noise over there.
So we’re going to press OK, the key programming is complete.
We’re gonna go ahead and turn off the car.
We have the lock, unlock, the trunk and the panic button, and we try to press them one by one to see if they can work. Okay, they can work.
We’re going to learn how to do is we’re gonna go ahead and enable the remote start function on these universal keys.
I’m gonna go ahead and turn off this car.
We’re gonna go to Key Tool Max menu.
We’re gonna go to “special functions”.
Select “VVDI smart key customization”
Then put the Xhorse remote into the keyhole of Key Tool Max. And go ahead to read.
Now it’s really easy to do this, you guys as you can see the start is 40 and the panic is 01, so we’re gonna switch those numbers around I want to press “Write” and it says “Write OK”.
We’re gonna see if it starts up the car, lock your car, go ahead and press the panic button.
Yeah, the job is done.
Take care!
