This article is available with the guide of programming Honda City ID47 all key lost with Xhorse VVDI Key Tool Max and Xhorse VVDI Mini OBD Tool.
Procedure:
1. Put the key into VVDI Key Tool Max
2. Go to the main page of Key Tool Max, click “Vehicle Remote”>>“Honda”>>“City”>>
“Fit(2017-2018)KeylessGo ID47 433M”>>“Generate Remote”.
3. When burning is successful, click “Complete”.
4. Plug VVDI Mini OBD Tool into the car.
5. Go to the main page of Mini OBD, click “Immo programming”>>“Honda”>>“Select by type”>>“Smart key system 2”>> “Start execution”>> “All smart keys are lost”.
6. Put a wanted programming smart key inside the car and click “OK”.
7. Click “OK” and enter the number of wanted registering keys, then click “OK” again.
8. When the screen shows “Can it operate normally to turn on ignition switch”, click “No”.
9. Press the start/stop button of engine.
10. When the screen shows “Whether the ignition switch is turned on”, click “Yes”.
11. Take all smart keys out of the car within 90 seconds, then press “OK” to continue.
12. Take another wanted programmed key inside the car within 80 seconds, then press “OK” to continue.
13. When the key is registered successfully, click “OK”.
14. Turn off the ignition switch.
15. When the screen shows “Whether indicator light is out”, click “Yes”.
16. Turn off the ignition switch and turn on the ignition switch according to the instructions of the screen.
17. When smart key registration is completed, click “OK”.
18. When matching is completed, click “Yes”.
Now, you can test the key. Done!
https://www.xhorse.co.uk/
