Today I’m gonna show how to program the 2017 Kia Forte all keys lost with Xhorse VVDI Key Tool Plus Pad by OBD. Need to read the password first, so that we can continue to program key adding or all keys are lost.
Step 1. Read Password
Connect VVDI Key Tool Plus to OBD.
Immo programming >> Asia >> KIA >> Read PIN code >> Password reading(8A smart card) >> Start programming >> Read PIN code
Please connect to the Internet before performing this function.
1. If there is an ignition key, please switch the ignition off and then switch it on.
2. If all keys are lost, please turn on double flash lamps, and close the driver’s door once.
Reading the password takes some time, please wait…
The password was read out.
Step 2. Program Smart Key
Select from model >> General market >> Forte(YD) >> 2013-2019 >> Smart keys programming >> Start programming >> Smart key programming
All smart keys need to match, the smart key that has not been matched will not be able to start the vehicle.
Please enter the password.
Please press the Once Start button.
Turn off the ignition switch, open then close driver door once.
After clicking “OK”, start the matching key. Within 5s, use the top of the smart key (with the indicator light) to keep pressing and holding the start button for 5s. Note that the original factory key should be attached vertically to the start button, and some non-original keys should be attached to the start button with the back of the key or the shell removed.
Press and hold the start button for 5s with the top of the smart key(the one with the indicator light) within 5s, the immo light will flash.
This smart key has been programmed successfully.
Click “Yes” to program the next one, and “No” to complete it.
Test the keys, all can work normally.
Done.
This uses Xhorse Key Tool Plus to program 2017 Kia Forte all keys lost successfully.
