Purpose: Mercedes Benz W204/W207 BE key simulator programming on bench
Tools:
Xhorse VVDI Key Tool Plus
Mercedes Benz dashboard & EIS modules
Xhorse ELV Emulator
A new smart key
Connect all devices for ready.
Procedure
Press on Key Tool Plus tablet:
Immo programming >> Europe >> Benz >> Select from system >> Password calculation >> Start programming
Connect the smart key with Key Tool Plus, press
Read BE key password >> Record the password, press “OK”
Return back to upper level,
EIS tools >> Start programming >> Auto detect(CAN) >> Read the lock(EIS) data >> OBD >> Yes >> Save to file >> Save here >> Rename, press “OK”
Go back to “ESL tool”,
Start programming >> OBD – W204, W207, W212 >> Write direction lock (ESL) data
Load the lock (EIS) data/ Motorola EEPROM file >> Select data file saved just now, press “Open”>> Continue >> Write direction lock (ESL) data
Whether to enable automatic clearing of TP and setting personalization?
Press “Yes”.
It will display SSID & key password automatically, press
OK >> OK >> Yes
Do you use ESL emulator for the ESL? Yes
Writing data success, press “OK” to finish.
Insert the key into EIS for a test, it can start the engine normally.
Programming has done!
This is using VVDI Key Tool Plus to perform simulator programming for Mercedes W204/W207 BE key successfully!
https://www.xhorse.co.uk/