Xhorse.co.uk Technical Support
This is a demonstration of how to add the BMW CAS2 key with Xhorse VVDI2 + GODIAG CAS1/CAS2 Mech-Key Test Platform on bench. Preparation 1. Connect GODIAG CAS1/CAS2 Test Platform & VVDI2, turn on power supply. 2. Take out a blank key and insert it into the ECU key port for test. The key pops out, which means this key is not paired. Open VVDI2 Software, BMW >> Key learn &Read More…
This is a tutorial on how to use Xhorse VVDI2 + GODIAG CAS4/4+ Test Platform to add a key for the 2016 BMW F18 LCI 525Li on the bench. The procedure works the same for CAS4/4+ key programming. Check the full operation video: Tools Required GODIAG Test Platform for BMW VVDI2 BMW working key BMW blank key CAS4/4+ module Procedure Connect all together, and turn ignition on GODIAG TRead More…
Xhorse VVDI2 incorrectly calculates ISN in BMW EDC17CP09 in ECU/CAS ISN – E-Series ISN – EDC17x(16 Bytes)!!! After reading EEPROM ECU using K-TAG in VVDI2 – File Make Key – CAS3+ (0L15Y, 0M23S) – Make Dealer Key – Have ECU dump file / no problem and gives the correct ISN. There is an offset of 8 bytes to the beginning of the data. The last two pictures show everything. Guys from Xhorse, fixRead More…
Problem: I could not make the keys to the BMW F15 with Xhorse VVDI2. I must say that there was no access to the car, since it was far away and available only the BDC and the ISN with ECU. BDC SWFL 00002419_052_010_030 This version of the SWFL is not supported in the VVDI2 and asks to upgrade the BDC. However, I was unable to perform a BDC upgrade using E-SYS on a table without a car, error:Read More…
Confirmed! Xhorse VVDI2 can work with Audi, VW, BMW and so on perfectly. Here share some successful test reports about VVDI2 from our customers. I successfully added a key bcm2 on a 2013 audi a5. 2007 Audi A4 B7 RB8 crypto – mileage correction ok Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly. A6/Q7 EZS Kessy: Added a dealer key (remoteRead More…
Recently we have received feedback from customers that they can’t find authorization options in Xhorse VVDI2 for BMW. One customer said he had bought VVDI2 full version, but can’t find VV-03, VV-04, VV-05, VB-03, VT-01 authorization options. He attached with a picture of his device. The other customer said he can’t find VPSA-01 PSA authorization option in VVDI2, and ask for help. Read More…
VVDI2 and VVDI Prog both support to read BMW ISN.For VVDI Prog,if support,it will display in the software.And here we will display VVDI2 read BMW ISN,read out BMW ISN on bench with BMW ISN DME cable. Method: 1.Connect VVDI2 with computer,and vvdi2 with BMW DME cable,as well as the BMW ECU. 2.Start VVDI2 BMW Software. 3.Choose Key Learn>>ECU/CAS ISN. Read More…
