VVDI Key Tool Plus Functions Overview

Here are the buttons of VVDI Key Tool Plus.

Now, I’ll introduce the functions of these buttons one by one.

1. Immo Matching
OBD matching, VVDI2, BMW tools, Benz tools & Benz special tools are all under this directory.
If you want to do OBD matching for a BYD vehicle, click “Immo matching”>>“BYD”, then you can operate it according to its vehicle type and vehicle year.

If you want to operate the Benz car, then you can choose “Benz”>>“By System”, then you can read& write key and generate the key file, etc.

2. Chip identification copy
Put the chip and the key in the detection coil of Key Tool Plus, then you do chip identification.

3. Remote Copy
Click “Remote Copy”, and you can see the remote frequency.

4. Chip Remote
It is used to generate different kinds of chips with the supermodel chip.

5. Remote Generate
It is used to generate ordinary remote, remote with chips, smart cards. You can choose different models according to different regions.

6. Write Startup
It is used for writing startup by reading the security data of the car body.

7. Programmer
It is used for reading & writing the security data of the engine, computer, body computer, meter, or an immobilizer.

8. Key Cutting
Click “Key Cutting”>>“Switch Equipment”, then you can connect different kinds of cutting machines for key copy operations or key all-lost operations.

9. Update Center
It is used for updating. For example, if you want to update the “Remote Database”, you can click the “Update” button after it.
If you want to update many items at the same time, you can click the “Onekey Update” button.

10. Internet Connection
Click the “Internet Connection” button then you can connect to the Internet.

11. Search
Click the “Search” button>>“Volkswagen”>>“Bora” and choose the key blank you need, say, “HU162T”, then you can enter the page of key cutting.

12. Question Mark
Click the “Question Mark” button, then you will enter the “Help Center”, which is the equivalent of the database. Here you can see “Video Center”, “Technical Article” buttons and so on.

Click “Video Center”, and you can view a lot of videos of operating steps of cutting machines or other equipment.

Click “Technical Article”, then you can see the articles about the operating steps of cutting machines or other equipment.

13. Car Anti-theft Data
It is the equivalent of the key database. For example, if you want to know the detailed info. of BAIC MOTOR, you can click “Domestic Brands”>>“BAIC MOTOR”>>“BAIC BJ20”, then you can see the detailed info. of the car.