Xhorse Dolphin XP005L Key Cutting Machine is able to copy a Citroen VA2T key in minutes successfully. Decoding an original key to cut a new key, is very simple. Following that, I’m gonna show you how to do it.
Procedure
Vehicle database >> Citroen >> All key blank >> VA2T
Rotate M5 clamp to side B.
Put the original key tip align 2nd position.
OK >> Decode key
Dolphin 2 starts reading the key…
Wait until decoding completed.
You’ll find key bitting have been read out on screen.
Remove the original key, and change to a new key blank.
Press “Cut key >> Cut”.
Dolphin 2 will start working again, this time it’s cutting key…
Turn over the key once cutting side was done.
Just repeat same operation to cut the second side.
Clean and take out the key when both sides were completed.
As you can see, it’s same as the original one.
It can open the lock.
Key cutting is successful!
For more Key Cutting Machine tutorials to be updated.
www.xhorse.co.uk
