Xhorse VVDI Key Tool Plus supports to program of a new smart key for 2009-2018 VOLVO XC60 without soldering. Just working with VOLVO Solder-free Adapters, actually easy and simple to save much time.
It needs to disassemble CEM & KVM module from the vehicle. The procedure includes reading CEM & KVM IMMO data & key programming. Check the steps below to learn how to do it.
Read CEM & KVM Data on Bench
1. Read CEM
Connect VOLVO XDNP28 Adapter, CEM module &VVDI Key Tool Plus.
Prog >> Immo >> VOLVO >> Other >> CEM1(R5F64525) >> Read >> IMMO DATA >> Begin >> Continue
Key Tool Plus starts reading…
Save CEM data file once reading 100%.
2. Read KVM
Connect VOLVO XDNP27 Adapter, KVM module &VVDI Key Tool Plus.
Prog >> VOLVO >> Other >> Adapter >> KVM(MC9S12DG256) >> Read >> IMMO DATA >> Begin >> Continue
Save KVM data file.
Program Key on Vehicle
Reinstall CEM & KVM module back to vehicle.
Connect VVDI Key Tool Plus with OBD2 port, press
IMMO programming >> VOLVO >> XC60 >> 2009-2018 >> Smart key system >> Adds smart keys >> Yes >> Load CEM file >> Yes >> Load KVM data
Click START button once.
VIN was read out.
The current number of keys: 2
Insert the new key to be programmed into key slot.
Take other keys out of the car 1 meter!
Remove the key from key slot, click UNLOCK button once.
(If the car does not response, try several times).
Program success.
Test the keys.
Both original key and new key are workable.
Done!
For professional locksmiths, buying VVDI Key Tool Plus with All Solder-Free Adapters will be more helpful and efficient.
www.xhorse.co.uk
