Today I’m gonna show how to collect 2019 Audi Q7 key data with Xhorse MLB Tool + VVDI Key Tool Plus. This will need to deduct 200 remote points for calculation.
Immo programming >> Audi >> Select by type >> MLB immobilizer systems >> Start programming
This function needs to be connected to the network, please make sure that the network connection is normal then click OK to continue.
Connection diagram >> Type2 Audi/Lamborghini
Follow the diagram to solder the circuit board, then connect to MLB Tool.
Click “Collect key data”.
Detected that the Key Tool Plus does not read the vehicle information data, continue to acquire data to save and the immo file will not contain vehicle information. Whether to continue?
Yes >> Collect original keys – points deduction
This calculation will deduct 200 remote points. Do you want to continue? Yes
Attention:
1. Please connect the acquisition cable with the device according to the diagram, and put the key flat on the sensing area of the device.
2. The TOP side of the acquisition cable is facing upward, VCC1 is aligned with VCC1, and VCC2 is aligned with VCC2.
Press OK to get data.
