Xhorse Dolphin XP005 can cut a key to 1990 Ford Ranger door cylinder with Xhorse VVDI Key Tool Max. In this post, I’ll show you how to do it.
This is the lock number 51441 and the H50 key blank.
Here is the procedure:
1. Switch to the homepage of DOLPHIN on Xhorse VVDI Key Tool Max, click “Cut by Bitting”>>enter the key blank name “Silca-FO14”.
2. Read the instructions on the screen and click “OK”.
3. Input the lock number 51441.
4. Use your finger to press the blank key on the clamp of Dolphin XP005and make sure it is flat.
5. Press “Cutting key”>>“Continue”, then Dolphin XP005 will begin cutting the key.
6. When cutting the key is finished, take out the key and check whether it can work.
Done!
