This is a 2015 Peugeot 208 with all keys lost. Having decoded & cut out the HU83 with Dolphin XP-005 machine, let’s go on programming the key. I’ll use Xhorse Key Tool Max + MINI OBD Tool to finish the job.
Read PIN Code
Plug Mini OBD Tool into OBD2 interface.
Turn ignition on.
Switch to Mini OBD function page:
Immo programming >> Peugeot >> Password reading >> Type 1 CAN(all key lost or adding) >> Execute >> IMMO password reading
This function will cause wiper to move, which is normal.
Turn on the double flash indicator.
Open then close the driver door once.
The PIN code for this car is: TKNY
Turn on ignition once, then program key.
Program Key
Go back to Select by model >> Start executing >> Key programming
Turn on the ignition switch!
Enter 4-digit password: TKNY
Please complete the following operations within 15s:
Turn off the ignition switch, then turn on the ignition switch!
Press “Confirm” after completing.
Programmed successfully.
Press “Yes” to program next one.
Insert new key and turn on ignition switch!
Programmed successfully.
Press “No” to complete.
VVDI Key Tool Max will display the steps to reprogram, and read it if need.
Take out the 2 keys, both can perfectly work.
Done.
