How to read EEPROM & reset kilometers for BMW CAS2 E60 with Xhorse VVDI Key Tool Plus? Following I’m gonna show the operation procedure, a total of 3 steps.
Step1. Read EEPROM
Remove the CAS2 module from BMW, and connect to VVDI Key Tool Plus.
Prog >> IMMO >> BMW >> CAS2(2K79X) >> Read >> EEPROM >> Start >> Continue
Reading success.
Save the EEPROM file.
Step2. Recalibrate KM
Immo programming >> Europe >> BMW >> Select from system >> CAS2 immo system >> KM repair >> Start programming >> Repair mileage via EEPROM >> Load EEPROM dump file, Open
Warning:
KM recalibration is only used for repairing car KM after exchanging a new dashboard!
You can not use this function for another purpose, the user should take all risks if used for illegal purposes.
Press “Yes”.
Old KM in file: 153856
Input new KM: 0
Confirm to change KM.
Press OK to save the new EEPROM dump file.
File existing, do you want to overwrite the current file? OK
Change KM in immobilizer success, flash the new file into immo ecu.
You must change KM in the instrument dashboard manually before connecting IMMO ECU to the car.
Step3. Write EEPROM
Prog >> IMMO >> BMW >> CAS2(2K79X) >> Write >> EEPROM >> Start, OK >> Load the new EEPROM file, Open >> Start >> Continue
Write completely.
Go back to read & save the EEPROM file again as the first step.
Let’s check if the mileage has been reset.
Reset KM success.
