Xhorse MLB-Tool Adapter is used for the data acquisition of keys for Audi, Porsche, Volkswagen, Lamborghini, Bentley, and other MLB models, and can be used with VVDI2, Key Tool Plus, and other professional tools to make keys, add keys, and program keys (For the types of keys supported for programming, please refer to the relevant help terms of the special software).
Next, let’s see how it works with VVDI2 and Key Tool Plus.
1. Use KEYTOOL PLUS
Step 1: First make sure the KEYTOOL PLUS is not connected to the OBD cable, then plug the MLB-TOOL adapter connected USB cable into the OTG data adapter, and plug the TYPE-C end of the OTG data adapter into the KEYTOOL PLUS TYPE-C USB port. Put the original car key in the MLB device sensing area to identify the original key.
Step 2: Please follow the software’s help tips to confirm that the key is a supportable type for the device, then remove the shell of the original key, take out the original key PCB, and refer to the software’s operating
instructions to perform the relevant welding operation. After the welding operation is completed, plug the welding harness into the corresponding port of the MLB-TOOL adapter, and at the same time, put the key flat in the center of the device’s sensing area.
Step 3: Select the [Key Data Acquisition] function in the MLB-TOOL adapter software to acquire and calculate data online.
Step 4: After the calculation data is completed, the dealer key can be generated (if you need to use the original vehicle ID, please read the vehicle information to get the ID first, and then use the [Modify Key ID] function to operate).
Step 5: Program New Key.
2. Use with VVDI2
Step 1: Connect the MLB-TOOL adapter to the PC via USB cable (no need for OTG data adapter), put the original key in the MLB device sensing area, and run the MLB software. Put the original key in the MLB device sensing area to identify the original key.
Step 2: Please follow the software’s help tips to confirm that the key is a supportable type for the device, then remove the shell of the original key, take out the original key PCB, and refer to the software’s operating
instructions to perform the relevant welding operation. After the welding operation is completed, plug the welding harness into the corresponding port of the MLB-TOOL adapter, and at the same time, put the key flat in the center of the device’s sensing area.
Step 3: Select the [Key Data Acquisition] function in the MLB-TOOL adapter software to acquire and calculate data online.
Step 4: Enter the MLB menu of VVDI2 software (Main Menu->Key Programming->MLB Key Programming), generate a dealer key (if you need to use the original key ID, first read the vehicle information to get the ID, and then use the [Modify Key ID function]).
Step 5: Program New Key.
For more info about MLB Tool, please visit www.xhorse.co.uk
