Xhorse.co.uk Technical Support
Customer Problem: Hi, my Condor XC-Mini Plus 2 has the following prompt after resetting the password, what should I do? Solution: Just follow the instructions of the machine to operate. For more technical support, please follow http://blog.xhorse.co.uk/Read More…
Customer problem: My Condor XC Mini PLus II cutting machine has the following error, how to fix it? Solution: You need to disassemble the device to check. Here are the steps: 1. Take out the screws shown in the picture below. 2. Pull out the entire motor to expose the entire motor housing and remove the screws to remove the motor housing. 3. After removing the mRead More…
Xhorse Condor XC-MINI Plus II M5 clamp is able to do key blank engraving & house dimple key duplication. But it should work with corresponding cutters that are optional purchase. Customers can ask for Xhorse.co.uk if in need. It’s worth noticing that the standard equipped cutters for M5 clamp are only for cutting vehicle keys. Locksmiths can decide whether to buy optional cutters based onRead More…
This article will guide you on how to connect WiFi on your Xhorse Condor XC Mini Plus II key cutting machine. There are two reference methods here: Method 1. Find the WiFi logo on the main interface of the Condor XC Mini Plus II APP and click Connect. Method 2. Set up Wi-Fi on the Condor XC Mini Plus II main system. Swipe up on the screen and you will see the logo as shown, click Read More…
CONDOR XC-MINI PLUS II comes with a host of whole-new amazing features with the aim to satisfy the needs of locksmiths to the largest extent. It’ll give a new level of user experience with technologies and breakthroughs like intelligent indicator lights, 8-core processor, engraving, and household keys. Compared with condor xc mini plus, what new features are added in plus 2? 1. Multi-PurposeRead More…
How to use Xhorse Condor XC-MINI Plus II to cut a household key RB locks dimple key? In the process, you’ll also need an original household key for duplication. Follow the procedure below to learn how to do. Full operation video https://www.youtube.com/watch?v=T3UxJENKZ14 1. Cutting Setting Settings >> Cutting setting >> Probe and cutter diameter setting >> Select “Read More…
When you receive your key cutting machine, how will you update it? Using a personal computer, download an upgrade kit, install the kit, connect the PC to the machine with a USB cable, and finally, you can update the device. These tedious processes are not required in the new condor xc mini plus ii. It allows users to directly update the system, APP, firmware, and database on the machRead More…
Xhorse Condor XC-Mini Plus supports cutting a HON66GP key by bitting codes in minutes. Since I have the original bitting codes, it’s easier to cut keys in this way. Firstly , fix a key blank to be cut on clamp, press Find bitting >> HON66GP >> Confirm >> Input bitting codes: 211351, 241351 >> Cut Condor XCMini machine will start cutting. Just wait until stoppeRead More…
Show how to cut Mul-T-Lock dimple key household key with Xhorse CONDOR XC-MINI PLUS II step by step. Video guide: https://youtu.be/t68gQF9MYts Prepare: The original key Lock cylinder 1.0mm Probe Dimple Cutter (internal) Dimple Cutter (external) M5 Clamp Steps: Step 1. Height Calibration Stick in the probe and the dimple cutter (internal) Make surRead More…
Do you want to engrave an “X” (Xhorse logo) on a blank key? Xhorse Condor XC-MINI Plus II can do it in 3 steps. Step 1. Insert the engraving cutter and the key blank. Step 2. Send the picture you want to engrave to the machine. Pair the machine with your smartphone via Bluetooth. Make sure the picture is in PNG format with transparent background. Send the picture. Read More…
